- Type "S" Pellet
Side Entry Valves - Type "FT"
Dust Collector Valves - Type "CDC-CI"
Rotary Valves
- Type "CI"
Drop Through Valves - Type "AF" (Aero Flow)
Blow Through Valves - Type "CI-MD"
Airlocks
ACS
Rotary Airlock Valves / Feeders
For Pneumatic Conveying and Bulk Material Handling
For Pneumatic Conveying and Bulk Material Handling
The ACS Maintenance Slide Gate is an economical means to shut off material flow during system repairs. Available in sizes: 6x6, 8x8, 10x10, 12x12, 14x14, 16x16, 18x18, 22x22, 26x26, 30x30. ACS also fabricates custom designs. The ACS Maintenance slide gates feature: CS channel construction, Stainless Steel Blade, Stainless Steel Transport Screw, Teflon Packing seals, Polyurethane or Bronze slider guides. It is available with handcrank, handwheel or air cylinder operators. 
ACS Double Dump Valves are suitable for discharging dry bulk
materials from cyclones, filters, hoppers, etc. These valves
are suitable for pressure differentials up to 20 inches of W.G.
The valve consists of a two-flapper design connected to counterweights,
which can be operated by a motor driven cam or pneumatic actuator
assembly. The flapper blade is of steel construction design
to insure optimum sealing. Quick release access ports in housing
are standard for inspection, cleaning or replacing parts. Sizes
available are 8, 10 and 12 inches with square inlets/outlets.
Fabricated transitions available to suit special flange/patterns.
ACS double dump valves can be fabricated in mild steel or stainless
steel construction. 
ACS Diverter Valves are suitable for use in the bulk handling field to re-route powders, pellets or granular materials from one discharge point to another. ACS Diverter Valves are of fabricated mild steel construction. The internal flap is designed and manufactured to insure there is an adequate seal to the non-operational end. The flapper assembly is mounted on the main shaft, which is supported by two 4-bolt flanged ball bearings. ACS Diverter Valves can be equipped with a manual operated action handle or pneumatically operated by an air actuator. Manufactured in 3 basic sizes 8", 10" and 12" with 60 degree outlets. Divert angles can be changed to suit the application and the product being handled. 3-Way diverter valves are available.
