Valves: Rotary Type
For Pneumatic Conveyor Systems and Bulk Material Handling
800-655-3447 | 3/11/2010 |
ACS Blow Through Aero-Flow feeders, available in 4 models, offer trouble-free service when handling most types of dry bulk materials (including difficult materials such as sugar). The double inlet action of air helps to thoroughly mix the product with the conveying air, sweeps each pocket clean as it reaches the discharge point, and increases the volumetric efficiency of the valve. The ACS Type CDC-CI Rotary Air Lock Valve is ideally suited for pressure or vacuum pneumatic conveying systems up to 15 psi. These precision-made valves are capable of handling the toughest products including abrasives such as silica and alumina and sticky substances such as sugar.
The ACS Flex-Tip Valves are suitable for use on an airlock, pneumatic feeders on conveying systems or as product metering devices. They can effectively maintain their air seal at pressure or vaccuum up to 18 W.G. FT Valves have been used in a wide range of industries: chemical, metallurgical, food, wood products, and grain/feed.
These premium quality fabricated valves feature a one-piece full pocket, double wiper seal design. This special design creates the best air seal possible with flex tip rotors.
Suitable for use on an airlock, pneumatic feeder on conveying systems or as a product metering device, Flex-Tip (FT) rotary valves have been used in a wide range of industries: chemical, metallurgical, food, wood products, and grain/feed. This special design with flex-tip rotors creates the best air seal possible. Ancaster Conveying Systems (ACS) designs, manufactures, installs and services dilute phase and dense phase pneumatic conveying systems and components. These components include blower packages, baghouse filters, filter receivers, rotary airlock valves, diverter valves, pressure vessels, and so on.
Contact us today for more information about: - blow through valves
- rotary air lock valves
- rotary valves
- pneumatic conveying
- rotary airlock valves
- industrial rotary valves
- rotary airlock
- drop through valves
FT Valves are available in sizes ranging from 6" to 30" and can be fabricated with square or round inlets/outlets. FT Valves can be fabricated in mild steel or stainless steel construction. Standard flex tip material is neoprene, optional materials available are EPDM, white neoprene, Buna N and polyurethane.
Quick deliveries on sizes 8", 10" and 12" valves.
At ACS Valves, we design and manufacture industrial rotary valve products for a diverse range of industries. The "CI" (drop through) airlock valves can be equipped to accomodate abrasive or otherwise difficult materials. Their unique ACST-4 shaft seals provide static and dynamic sealing capabilities and require little maintenance.
At ACS Valves, we design and manufacture rotary valves for a diverse range of industrial uses.
We would like to answer any questions you may have about ACS. Please call us at 800-655-3447 or email us.
|
